Shop - Green Equipment Limited

DG 50 EXP – INDUSTRIAL THREE PHASE

admin — Thu, 12 May 2022 05:11:37 +0000

SUCTION UNIT
The suction unit is a side channel blower, with direct coupling between the motor and the impeller fan. It designed without any transmission system, and is therefore silent, totally maintenance free and suitable for continuous duty operations.
A pressure relief valve protects the motor, providing additional air for cooling.
FILTER UNIT
The large surface star filter, located inside the filter chamber, is made of polyester and provides high resistance against clogging and passage of fine dust.
It is possible to clean the filter using an integrated mechanical system: an external lever shakes the filter vertically and enables to clean the filter thoroughly and safely, maintaining constant suction performance and preventing any dispersion of dust in the environment.
COLLECTION UNIT
The vacuum is assembled onto a sturdy steel chassis, and provided with industrial quality wheels , that make it suitable for mobile service even when used on rough surfaces.
The vacuumed material is collected into a wheeled steel container, which can be extracted for easy disposal and can be used with optional disposable bags, for safer and handier disposal The detachable steel collection tank has a quick release system for the rapid disposal of the sucked material.
The unit is manufactured with thick painted steel for improved sturdiness and long-lasting lifetime
OPTIONALS
OTHER VOLTAGES AND FREQUENCIES AVAILABLE UPON REQUEST
ABSOLUTE HEPA FILTER /H14
ANTISTATIC FILTER CLASS M
PTFE COATED FILTER CLASS M
STAINLESS STEEL CHAMBER
STAINLESS STEEL TANK AND FILTER CHAMBER
CYCLONE FOR FILTER PROTECTION
FLOATING DEVICE TO STOP SUCTION WHEN THE BIN IS FULL OF LIQUIDS
REMOTE CONTROL

SUCTION UNIT
Voltage V – Hz 400 50 3-
Power
kW
4
Electrical protection IP 55 Max water lift mmH₂O 3200/2600 Max air flow m³/h 420 Suction inlet mm 80 Noise level (EN ISO 3744) dB(A) 72
FILTER UNIT
Filter Type
Star Surface – Diameter cm²-mm 30.000 – 500 Material – Efficiency IEC 60335-2-69 Polyester – L Air load on filter m³/m²/h 140 Cleaning system Manual
COLLECTION UNIT
Discharge system Roll-out container Capacity lt 100
VOLUME
Dimensions cm 66x118x145h Weight
kg
137

The post DG 50 EXP – INDUSTRIAL THREE PHASE appeared first on Green Equipment Limited.

DG 70 EXP – INDUSTRIAL THREE PHASE

admin — Thu, 12 May 2022 05:08:37 +0000

SUCTION UNIT
A pressure relief valve protects the motor, providing additional air for cooling.
The suction unit is a side channel blower, with direct coupling between the motor and the impeller fan. It designed without any transmission system, and is therefore silent, totally maintenance free and suitable for continuous duty operations.
The suction is generated by one through-flow motor, which operates thanks to the air that travels through the fan system and is discharged directly over the motor windings as it exits, so the air also provides cooling for the motor.
FILTER UNIT
The large surface star filter, located inside the filter chamber, is made of polyester and provides high resistance against clogging and passage of fine dust.
It is possible to clean the filter using an integrated mechanical system: an external lever shakes the filter vertically and enables to clean the filter thoroughly and safely, maintaining constant suction performance and preventing any dispersion of dust in the environment.
COLLECTION UNIT
The vacuum is assembled onto a sturdy steel chassis, and provided with industrial quality wheels , that make it suitable for mobile service even when used on rough surfaces.
The detachable steel collection tank has a quick release system for the rapid disposal of the sucked material.
The container is detachable , compact and contains the sieve grid which retains the solid part.
The vacuumed material is collected into a wheeled steel container, which can be extracted for easy disposal and can be used with optional disposable bags, for safer and handier disposal
OPTIONALS
ANTISTATIC FILTER CLASS M
PTFE COATED FILTER CLASS M
STAINLESS STEEL COLLECTION TANK
STAINLESS STEEL TANK AND FILTER CHAMBER
EARTH GROUNDING
CYCLONE FOR FILTER PROTECTION
FLOATING DEVICE TO STOP SUCTION WHEN THE BIN IS FULL OF LIQUIDS
EVYBOLTS FOR LIFTING
FORK LIFT INTAKES
PRESSURE DIFFERENTIAL KIT FOR USE OF DISPOSABLE BAG
ABSOLUTE HEPA FILTER /H14
ANTISTATIC FILTER CLASS L

SUCTION UNIT
Voltage V – Hz 400 – 50
Power
kW
5,5
Electrical protection IP 55 Max water lift mmH₂O 3.600/3.000 Max air flow m³/h 530 Suction inlet mm 80 Noise level (EN ISO 3744) dB(A) 72
FILTER UNIT
Filter Type
Star Surface – Diameter cm²-mm 30.000-500 Material – Efficiency IEC 60335-2-69 Polyester – L Air load on filter m³/m²/h 176 Cleaning system Manual
COLLECTION UNIT
Discharge system Capacity lt 100
VOLUME
Dimensions cm 66x118x145h Weight
kg
150

The post DG 70 EXP – INDUSTRIAL THREE PHASE appeared first on Green Equipment Limited.

DG 50 EXP SE – INDUSTRIAL THREE PHASE

admin — Thu, 12 May 2022 05:05:46 +0000

SUCTION UNIT
A pressure relief valve protects the motor, providing additional air for cooling.
The suction unit is a side channel blower, with direct coupling between the motor and the impeller fan. It designed without any transmission system, and is therefore silent, totally maintenance free and suitable for continuous duty operations.
FILTER UNIT
The large surface star filter, located inside the filter chamber, is made of polyester and provides high resistance against clogging and passage of fine dust.
It is possible to clean the filter using an integrated mechanical system: an external lever shakes the filter vertically and enables to clean the filter thoroughly and safely, maintaining constant suction performance and preventing any dispersion of dust in the environment.
COLLECTION UNIT
The vacuum is assembled onto a sturdy steel chassis, and provided with industrial quality wheels , that make it suitable for mobile service even when used on rough surfaces.
The vacuumed material is collected into a wheeled steel container, which can be extracted for easy disposal and can be used with optional disposable bags, for safer and handier disposal The detachable steel collection tank has a quick release system for the rapid disposal of the sucked material.
The unit is manufactured with thick painted steel for improved sturdiness and long-lasting lifetime
OPTIONALS
ABSOLUTE HEPA FILTER /H14
ANTISTATIC FILTER CLASS M
PTFE COATED FILTER CLASS M
STAINLESS STEEL TANK AND FILTER CHAMBER
FLOATING DEVICE TO STOP SUCTION WHEN THE BIN IS FULL OF LIQUIDS
CYCLONE FOR FILTER PROTECTION
REMOTE CONTROL
OTHER VOLTAGES AND FREQUENCIES AVAILABLE UPON REQUEST
STAINLESS STEEL CHAMBER

SUCTION UNIT
Voltage V – Hz 400 – 50
Power
kW
4,3
Electrical protection IP 55 Max water lift mmH₂O 5.100/3.700 Max water lift mmH₂O 5.100/3.700 Max air flow m³/h 320 Suction inlet mm 80 Noise level (EN ISO 3744) dB(A) 73
FILTER UNIT
Filter Type
Star Surface – Diameter cm²-mm 30.000 – 500 Material – Efficiency IEC 60335-2-69 Polyester – L Air load on filter m³/m²/h 107 Cleaning system Manual
COLLECTION UNIT
Discharge system Roll-out container Capacity lt 100
VOLUME
Dimensions cm 66x118x145h Weight
kg
145

The post DG 50 EXP SE – INDUSTRIAL THREE PHASE appeared first on Green Equipment Limited.

MTL 301 DUST – INDUSTRIAL SINGLE PHASE

admin — Thu, 12 May 2022 05:03:12 +0000

SUCTION UNIT
The suction is made by a carbon brush by-pass motor which is activated by an independent switch placed inside a robust metal motor head. The motor head is soundproofed by sound-absorbent material.
FILTER UNIT
It is possible to clean the filter using the Dustop, an integrated reverse pulse system: by closing the suction inlet and opening a flap in the filter chamber, the airflow generated by the motor cleans the filter thoroughly and safely, maintaining constant suction performance and preventing any dispersion of dust in the environment.
The suction inlet is tangential and the cyclone is entirely welded, consequently slowing the sucked chips and protecting filters.
COLLECTION UNIT
The vacuumed material is collected into a wheeled steel container, which can be extracted for easy disposal and can be used with optional disposable bags, for safer and handier disposal
OPTIONALS
OTHER VOLTAGES AND FREQUENCIES AVAILABLE UPON REQUEST
ABSOLUTE HEPA FILTER /H14
ANTISTATIC FILTER CLASS M
STAINLESS STEEL COLLECTION TANK
STAINLESS STEEL TANK AND FILTER CHAMBER
REMOTE CONTROL

SUCTION UNIT
Voltage V - Hz 230 - 50
Power
kW
1,15
Max water lift mmH₂O 2.500 Max air flow m³/h 180 Suction inlet mm 50 Noise level (EN ISO 3744) dB(A) 74
FILTER UNIT
Filter Type
Cartridge Surface - Diameter cm²-mm 6.000 - 360 Material - Efficiency IEC 60335-2-69 Polyester - M PTFE Air load on filter m³/m²/h 300 Cleaning system Dustop
COLLECTION UNIT
Discharge system Capacity lt 13
VOLUME
Dimensions cm 46x48x85h Weight

The post MTL 301 DUST – INDUSTRIAL SINGLE PHASE appeared first on Green Equipment Limited.

ZEFIRO EL Z22 – ATEX EXPLOSION PROOF

admin — Thu, 12 May 2022 04:59:52 +0000

The post ZEFIRO EL Z22 – ATEX EXPLOSION PROOF appeared first on Green Equipment Limited.

DG 75 and DG 75 AF

admin — Thu, 12 May 2022 04:55:04 +0000

Features
3 Compact, portable and constructed with powder coated steel 3 Side channel blower (continuous use / no maintenance up to 30,000 hours) 3 Tangential inlet with cyclone filter protector 3 Removable collection tank with two-handed safety release 3 Large filter surface 3 Performance indicator light 3 Pressure relief valve 3 Integrated cleaning system 3 Control panel
DG 75 and DG 75 AF are two of the most compact vacuums among their power level and abilities. DG 75 AF produces an exceptional airflow rate that may be divided up to 4 ways for speed cleaning (this varies by application).
Voltage V – Hz 460 – 60 3~ 460 – 60 3~ Power HP (kW) 11.5 (8.6) 11.5 (8.6) Max Water Lift inH2O (mmH2O) 137.8 (3500) 106.3 (2700) Max Airflow CFM (m3/h) 367.9 (625) 497.3 (845) Electrical Protection IP Class 55 55 Capacity gal (L) 26 (100) 26 (100) Dimensions in (WxLxH) 26 x 46 x 69 26 x 46 x 69 Weight lbs (kg) 375 (170) 375 (170) Noise Level (EN ISO 3744) dB(A) 76 76 Suction Inlet in (mm) 3 (80) 3 (80)

Optionals
Primary Filter Star Surface Area 53 ft² (5 m²) Media Class (IEC 60335-2-69) Antistatic Polyester – Class M Cleaning System Manual Air Load – ft/min (m/h) 7.1 (108) / 9.4 (143)
Features
3 Compact, portable and constructed with powder coated steel 3 Side channel blower (continuous use / no maintenance up to 30,000 hours) 3 Tangential inlet with cyclone filter protector 3 Removable collection tank with two-handed safety release 3 Large filter surface 3 Performance indicator light 3 Pressure relief valve 3 Integrated cleaning system 3 Control panel
DG 75 and DG 75 AF are two of the most compact vacuums among their power level and abilities. DG 75 AF produces an exceptional airflow rate that may be divided up to 4 ways for speed cleaning (this varies by application).

• Certified HEPA Class H14 (99.995% @ 0.18 µm) • PTFE Coated Filter (Class M) • NOMEX Heat Resistant Filter • Earth Grounding
• Partial or Full Stainless Steel Frame • Pressure Differential Kit • Sieve Grid and Discharge Valve • Ring Bolt and Fork Lift Intakes
• NRTL Certified Version (Class II, Div. 2) • Other Cleaning Systems Available • More Power Sources Available By Request

The post DG 75 and DG 75 AF appeared first on Green Equipment Limited.

DG 30 EXP – INDUSTRIAL THREE PHASE

admin — Thu, 12 May 2022 04:50:57 +0000

Side channel blower motor , powerful and
silent, totally maintenance free, suitable for
continuous duty
Largest surface filter in its category
Pressure relief valve for motor protection
Compact and mobile
Long lasting
Very suitable for the suction of large
quantities of material
Easily removable container for safe disposal
of collected material
High efficiency filtration
Low noise level
Suitable for continuous use 24/7
SUCTION UNIT
Voltage V – Hz 400 50 3-
Power kW 3
Electrical protection IP 55
Max water lift mmH₂O 3200/2600
Max air flow m³/h 318
Suction inlet mm 80
Noise level (EN ISO 3744) dB(A) 72
FILTER UNIT
Filter Type Star
Surface – Diameter cm²-mm 30.000 – 500
Material – Efficiency IEC 60335-2-69 Polyester – L
Air load on filter m³/m²/h 106
Cleaning system Manual
COLLECTION UNIT
Discharge system
Capacity lt 100
VOLUME
Dimensions cm 66x118x145h
Weight kg 130
SUCTION UNIT
The suction unit is a side channel blower, with direct coupling between the motor and the
impeller fan. It designed without any transmission system, and is therefore silent, totally
maintenance free and suitable for continuous duty operations.
A pressure relief valve protects the motor, providing additional air for cooling.
FILTER UNIT
The large surface star filter, located inside the filter chamber, is made of polyester and
provides high resistance against clogging and passage of fine dust.
It is possible to clean the filter using an integrated mechanical system: an external lever
shakes the filter vertically and enables to clean the filter thoroughly and safely, maintaining
constant suction performance and preventing any dispersion of dust in the environment.
COLLECTION UNIT
The vacuum is assembled onto a sturdy steel chassis, and provided with industrial quality
wheels , that make it suitable for mobile service even when used on rough surfaces.
The vacuumed material is collected into a wheeled steel container, which can be extracted
for easy disposal and can be used with optional disposable bags, for safer and handier
disposal
The detachable steel collection tank has a quick release system for the rapid disposal of the
sucked material.
The unit is manufactured with thick painted steel for improved sturdiness and long-lasting
lifetime

The post DG 30 EXP – INDUSTRIAL THREE PHASE appeared first on Green Equipment Limited.

YP 1/6 ECO B

admin — Wed, 16 Feb 2022 09:57:13 +0000

KEY FEATURES

Easy Storage Thanks To Cable Hook
EcoMotor - Best Performance With Maximum Energy Saving
EcoBrush - Powerful Combi Nozzle For High Cleaning Efficacy
Ergonomic design for professional cleaning
Lightweight and compact for easy use and storage
Large rear wheels for easy manoeuvring
On/off switch operated by foot
Practical holder for accessories
Parking Position

The post YP 1/6 ECO B appeared first on Green Equipment Limited.

YS 2/45 W&D

admin — Wed, 16 Feb 2022 09:56:15 +0000

Our technology data.

POWER MAX

2800 W
WATER LIFT

2230 mmH₂O
AIRFLOW

510 m³/h
TANK CAPACITY

45 l
CABLE LENGTH

8,5 mt
VOLTAGE

220-240 V

The post YS 2/45 W&D appeared first on Green Equipment Limited.

YP 3/62 W&D

admin — Wed, 16 Feb 2022 09:54:57 +0000

Our technology data.

POWER MAX

3500 W
WATER LIFT

2230 mmH₂O
AIRFLOW

765 m³/h
TANK CAPACITY

62 l
CABLE LENGTH

8,5 mt
VOLTAGE

The post YP 3/62 W&D appeared first on Green Equipment Limited.

Shop - Green Equipment Limited

DG 50 EXP – INDUSTRIAL THREE PHASE

DG 70 EXP – INDUSTRIAL THREE PHASE

DG 50 EXP SE – INDUSTRIAL THREE PHASE

MTL 301 DUST – INDUSTRIAL SINGLE PHASE

ZEFIRO EL Z22 – ATEX EXPLOSION PROOF

DG 75 and DG 75 AF

DG 30 EXP – INDUSTRIAL THREE PHASE

YP 1/6 ECO B

KEY FEATURES

YS 2/45 W&D

Our technology data.

POWER MAX

WATER LIFT

AIRFLOW

TANK CAPACITY

CABLE LENGTH

VOLTAGE

YP 3/62 W&D

Our technology data.

POWER MAX

WATER LIFT

AIRFLOW

TANK CAPACITY

CABLE LENGTH

VOLTAGE